ST Floors and Walls LogoS T Floors & Walls

Accessories

The profiles that finish a floor. Each one is listed with the code you order by and the size it comes in — tell us the profile and the room, and we will advise on the rest.

Skirting

Profiles that close the gap where floor meets wall.

7 profiles

Skirting 100 profile, 100 mm tall, photographed on a white background

Skirting 100

Code
Skirting 100
Size
100 mm

Closes the gap where the floor meets the wall and covers the joint between them. The tallest skirting profile in this range.

Ask about this profile
Skirting 90 profile, 90 mm tall, photographed on a white background

Skirting 90

Code
Skirting 90
Size
90 mm

Closes the gap where the floor meets the wall and covers the joint between them.

Ask about this profile
Skirting 80A profile, 80 mm tall, photographed on a white background

Skirting 80A

Code
Skirting 80A
Size
80 mm

One of three 80 mm skirting profiles in this range. Tell us which one you need and we will match it to your floor.

Ask about this profile
Skirting 80B profile, 80 mm tall, photographed on a white background

Skirting 80B

Code
Skirting 80B
Size
80 mm

One of three 80 mm skirting profiles in this range. Tell us which one you need and we will match it to your floor.

Ask about this profile
Skirting 80K profile, 80 mm tall, photographed on a white background

Skirting 80K

Code
Skirting 80K
Size
80 mm

One of three 80 mm skirting profiles in this range. Tell us which one you need and we will match it to your floor.

Ask about this profile
Skirting 60A profile, 60 mm tall, photographed on a white background

Skirting 60A

Code
Skirting 60A
Size
60 mm

One of two 60 mm skirting profiles in this range. Tell us which one you need and we will match it to your floor.

Ask about this profile
Skirting 60B profile, 60 mm tall, photographed on a white background

Skirting 60B

Code
Skirting 60B
Size
60 mm

One of two 60 mm skirting profiles in this range. Tell us which one you need and we will match it to your floor.

Ask about this profile

Stair

Nosing, board and tread for a finished step.

5 profiles

Stair Nose A, a moulded nosing profile for the front edge of a step, on a white background

Stair Nose A

Code
Stair Nose A

Covers the front edge of a step so it reads as a finished nosing. One of three in this range: send us a photo of your stair and we will tell you which you need.

Ask about this profile
Stair Nose B, a moulded nosing profile for the front edge of a step, on a white background

Stair Nose B

Code
Stair Nose B

Covers the front edge of a step so it reads as a finished nosing. One of three in this range: send us a photo of your stair and we will tell you which you need.

Ask about this profile
Stair Nose C, a moulded nosing profile for the front edge of a step, on a white background

Stair Nose C

Code
Stair Nose C

Covers the front edge of a step so it reads as a finished nosing. One of three in this range: send us a photo of your stair and we will tell you which you need.

Ask about this profile
Stair Board, a board profile for a stair step, on a white background

Stair Board

Code
Stair Board

A board profile for a step. Send us a photo of your stair and we will confirm whether this or Stair Tread is the one you need.

Ask about this profile
Stair Tread, a tread profile for the top of a stair step, on a white background

Stair Tread

Code
Stair Tread

A tread profile for the top of a step. Send us a photo of your stair and we will confirm whether this or Stair Board is the one you need.

Ask about this profile

Trim & Corners

Caps and transition strips for ends, corners and thresholds.

4 profiles

End Cup, a moulded cap that closes the open end of a skirting run, on a white background

End Cup

Code
End Cup

Closes the open end of a skirting run so the profile finishes cleanly.

Ask about this profile
Quarter Round, a convex corner trim with a rounded face, on a white background

Quarter Round

Code
Quarter Round

Covers an exposed edge or an external corner, and takes the sharp arris off.

Ask about this profile
Reducer, a tapered transition strip between floors of different heights, on a white background

Reducer

Code
Reducer

Bridges a change in floor height between two floors, such as where one flooring meets another or meets a step.

Ask about this profile
T-Moulding, a flat-topped transition strip covering a joint between equal-height floors, on a white background

T-Moulding

Code
T-Moulding

Covers the seam where two floors of the same height meet, hiding the joint between them.

Ask about this profile

Not sure which profile you need?

Send us the room, the floor you have chosen and a measurement, and we will tell you which profiles to order and how much you need.

Request a QuoteCall the Team